HSR Engineering (PVT) Ltd

| |
Chat Now

H S R Engineering (PVT)LTD

8/1, Flower Road, Colombo 03. Sri Lanka
Displaying 1-9 of 9 results.

A high grade easy to handle integral waterproofing admixture for both waterproofing and concrete corrosion protection using unique nanotechnology to chemically modify the cement matrix by reacting with the cement paste to reduce pore & capillary size. The reaction between Conmix H2O Stop and cement paste produces a non soluble crystalline structure throughout the pores & capillaries permanently sealing the concrete. Conmix H2O Stop is available in two forms liquid or powder.

    Basement, Swimming Pool & Water Tank Waterproofing



      For Light Water Leak Just Plug with Conplug Prepare concrete or rock in ā€œVā€ shape around leak. Remove loose material, clean prior to application of Conplug... Start filling from outside work toward centre of the leak. The material should be held in place & leveled off. With excessive pressure use a wooden plug first & then cover with Conplug or work as below.

        Contite 40 Contite 40 Contite 40 Contite 40 Contite 40 is a clear silane based water repellent sealer which upon application will penetrate into the substrate for long-term protection and provide water repellency by chemically reacting with the substrate. It has a micro particle size to achieve deep penetration inhibiting water absorption into the substrate. When cured it does not alter the appearance of surfaces and being non-film forming will allow the substrate to breathe. It may be used on old or new structures.

          A two part acrylic polymer modified highly flexible cementitious waterproof membrane supplied in kits ready to use for the protection of concrete and mortar. Contite Contite Contite Contite Contite FCW FCW FCW FCW FCW provides excellent adhesion, flexibility, crack bridging ability, and durability

            Contite Flex Contite Flex Contite Flex Contite Flex is a two part polymer modified flexible waterproofing slurry consisting of a liquid polymer as Part A and a premixed powder as Part B. On mixing the two parts together a brush or sprayable smoothe slurry is created which produces a fully bonded waterproof membrane to most substrates

              Contite G900 is a two component hydrogel injection grout with the mix ratio 1:1 to be used as a waterstop system producing an elastomeric gel. It provides an effective means of stopping water seepage and consists of a solvent free material

                Contite ContiteHHH ContiteSeal AC ContiteSeal Mortar ConmixH2O Stop

                  ElastocladHR Elastoclad ElastocladPU

                    Displaying 1-2 of 2 results.

                    Evercrete DPS is an environmental friendly, non-toxic, odorless, clear, water-soluble liquid compound, which is safe and easy to use. Evercrete DPS outlasts and outperforms every other sealant on the market today. It is inorganic and based on natural minerals, affecting neither your health or the environment. Furthermore Evercrete DPS can be stored for extended periods.

                      Top Seal


                      Evercrete TS is clear non-glossy one coat application water repellent that has the ability to extend the lifetime of concrete, natural stone such as sandstone or marble, paving, bricks and wood. Evercrete TS protects against the elements they are subjected to on a daily basis. Rain, salts, oils and chemicals all wear down the integrity of these surfaces over years leading to unsightly stains from mold, algae and gradual decay. Evercrete TS is a non-toxic, one coat application that completely seals and waterproofs a variety of surfaces. Evercrete TS should not alter the color, texture, orany other physical characteristic of the surface to which it is applied, leaving a clear natural finish that will completely repel water, seal and waterproof the surface.

                        Displaying 1-10 of 43 results.

                        Cooonnntttoooppp PPPllluuusss EEE is a premixed non rusting floor hardener used to form a monolithically hardened concrete floor. It gives an abrasion resistant and hard wearing surface and is applied by shake on methods

                          Contop Plus is a premixed non metallic floor hardener used to form monolithically hardened concrete floors. Contop Plus provides a hardened abrasion resistant surface and can also be used to inhibit dust formation.

                            A ready to use economical liquid floor hardener and dust proofer. It impregnates the surface of the concrete causing a reaction between the chemical solution and components of the cement to deposit siliceous materials which close the pores. The end result being a hardened and dust proof surface.

                              Floorgard EB Floorgard EB is a two part, low viscosity, epoxy resin system which is mixed with Floorgard EB Floorgard EB Floorgard EB Floorgard EB Floorgard EB Fillers Fillers Fillers Fillers Fillers to produce a heavy duty screed or mortar of various consistencies. It may be used to form a wearing screed, for patch repairs or as an intermediate screed before applying Floorgard SLT Floorgard SLT Floorgard SLT Floorgard SLT Floorgard SLT self levelling epoxy floor system.

                                Floorgard HP is a four component (Base, Hardener, Filler & Colour Pack) solvent-free epoxy resin high build coating. The formulation was chosen to allow the incorporation of non-skid grit and provide a high degree of chemical and abrasion resistance. The result is a satin smooth finish coloured to individual requirements. It has excellent adhesion qualities, is impervious and easily cleaned. NB: Care has been taken to ensure that colours manufactured under our modern process are as close as possible to agreed reference samples. However, it should be noted that no guarantee can be given of exact colour matching. An on site trial should be carried out to ensure that the correct grade of grit is chosen so that the required degree of skid resistance and aesthetic appearance is obtained

                                  Floorgard Moisture Barrier Floorgard Moisture Barrier Floorgard Moisture Barrier Floorgard Moisture Barrier Floorgard Moisture Barrier is a 2 component, semigloss to gloss water based epoxy coating. When applied at 150 micron dry film thickness it will provide a tenaciously bonded coating controlling the transmission of liquid moisture.

                                    Congrout 1000 Congrout 1000 is a fine precision non shrink, high performance grout with extended working time. Congrout Congrout Congrout Congrout Congrout 1000 1000 1000 1000 1000 complies to ASTM C1107, Type C.

                                      A cementitious non shrink precision grout with high early & final strengths specifically for applications where early loading is required. A self leveling, premixed, non metallic grout which produces a dense durable homogeneous mix with no long term shrinkage. Congrout 4000 Congrout 4000 Congrout 4000 Congrout 4000 Congrout 4000 complies to ASTM C1107, Type C.

                                        A ready to use grout injection aid in powder form. A multi component non chloride containing admixture which allows for the reduction in water cement ratio with corresponding strength increases. Expansion ensures good interfacial contact is maintained

                                          ongrout Admix Congrout Admix Congrout Admix is a powdered admixture for use in cementitious grouts and concrete. It is formulated to produce improved grout quality and increased durability, while overcoming problems of settlement and plastic shrinkage using a gaseous expansion mechanism.

                                            My Buying Leads

                                            No Selected Buying Leads

                                            • No Buying Leads


                                            TypePrivate Company
                                            City Colombo 2
                                            Address 8/1, Flower Road, Colombo, Sri Lanka