Rrawlplug

Simple installation in all standard substrates (A,B,C).
Excellent plate stiffness (value 1.0 kN/mm) ensures smooth elevation surface and stable insulation system.
The long plastic overmoulding on the TFIX-8M nail minimises thermal bridging (value 0.002W/K), contributing to energy-saving benefits.
Unique nail design allows for high load-bearing capacities. This reduces the quantity of fixings required per square metre of insulation.
The shortest embedment depth at the maximum strength parameters
Pre-assembled expansion nail saves time and labour.

Stainless steel self drilling screw made ​​with BIMETAL
Hardened surface of the thread (flexible core). Corrosion resistant zinc coating of thickness not less than 12 um. The shape of the thread and its height is closely related to the intended use of self drilling fixing into steel construction.
Self vulcanizing EPDM washer. Temperature and UV resistant. The special shape of the washer ensures proper seating of the sealing material on the outer cladding material fixture which guarantees a proper seal.

Integrated disc facilitates optimum TFIX-8S installation, setting the flange flush with the surface of the insulation
User-friendly - enables fast and easy installation
Torx-40 bit type

nique construction of screw thread section provides support for wide variety of diameters, without limitation of screws’ length.
Unique self-drilling point allow precise installation through any type of façade plaster, preventing from breaking its surface
No thermal bridging
Ribs on the internal surface of plate provide locking in surface during driving screws in and out and even surface of plug with substrate after fixing

The button contracts on entry and then relaxes to secure the two panels.
Simple and quick to install.
Plastic ribs on the fir tree fastener flex inwards as the item is pushed into place and then relax to grip the sides of the hole into which it has been inserted. This forms a secure fastening in the panel or sheet.

Easy installation with best performance in lightweight base materials
Approved for use in base material categories B, C, D, and E
Steel nail allows fast and trouble-free installation with correct expansion of the plug.
Reduction of thermal bridge formation (value 0.3W/K) through the integration of an impact-resistant plastic overmoulding on the nail head.
Plate stiffness (value 0.5 kN/mm) ensures smooth elevation surface and stable insulation system.
Can be used with additional KWL insulation holding plate, available in 90, 110 and 140mm flange sizes.

R-SPL-II-L SafetyPlus Loose Bolt

Features and benefits
• Mechanical anchor for highest tension and shear
loads
• Seismic category C2 for Structural applications.
Seismic category C1 for non-structural use in
areas with low seismic risk.
• For usage with required fire resistance
• Option 1 ETA for Cracked and Non- Cracked
Concrete.
• Antirotation brush to prevent rotation during
installation.
• Anchor's construction allows easy
through-installation (drilling and installation
through fixed material)
• Three types of tips (nut, flat or tapered bolt) allow
simple fitment for installed element
• 8.8 grade steel material of anchor provides

Features and benefits
• Mechanical anchor for highest tension and shear
loads
• Seismic category C2 for Structural applications.
Seismic category C1 for non-structural use in
areas with low seismic risk.
• For usage with required fire resistance
• Option 1 ETA for Cracked and Non- Cracked
Concrete.
• Antirotation brush to prevent rotation during
installation.
• Anchor's construction allows easy
through-installation (drilling and installation
through fixed material)
• Three types of tips (nut, flat or tapered bolt) allow
simple fitment for installed element
• 8.8 grade steel material of anchor provides
high durability

Features and benefits
• Design of SafetyPlus allows for easy through fixing
• Integral controlled collapse and anti-rotation
feature ensures fixture is firmly secured
• Unique zig-zag feature provides balanced
expansion, ensuring secure setting and maximised
load-bearing capacity
• Case-hardened nut with optimum taper angle
for enhanced expansion

ANGLE GRINDER CUTTING AND GRINDING WHEELS